...
In order to avoid excessive buffering and data loss, make sure to reduce the amount of data being streamed from Motive. We recommend the streaming settings below. Make sure to set the local interface IP to the IP of the network connection that is being used for communicating with the HMD. It is a common mistake to not set this IP correctly. If the correct IP doesn’t show up, restart Motive.
...
Intercalibration
| Note |
|---|
Note that if you have a pre-configured target from ART or Optitrack, you don’t need to do the intercalibration. You only need to do this if you have a custom target attached to your HMD. |
Example videos
Motive
Intercalibration tool: https://www.dropbox.com/scl/fi/1nkt3acbq69omehzz0j28/Intercalibration-tool-cryptolens.mp4?rlkey=qtg49h7kzbhcs4cz32yrnx7vn&dl=0
DTrack
PC screen recording: https://www.dropbox.com/scl/sfi/oqt3blgb18qwxdc6ouhtkac6409iekn51hbc/setupLPVRAIR-PC.mp4?rlkey=7ib34as0bfz4veqw69u0s6tga&st=yzvh9g4g&dl=0
Quest screen recording: https://www.dropbox.com/sscl/fi/xgfrwlyfrulqnft8fpsoybeb67sfn6x35ijt/setupLPVRAIR-Quest2.mp4?rlkey=xy2s5irxaguy5mw7ci8ep8tks&st=118r4rw8&dl=0
Software Required
PC
Optical system software: Motive / DTrack software
SteamVR (download Steam Client from official site, and then follow instructions here)
lh_opt_calib.exe
Dongled ← requires dongle hardware
Cryptolens ← requires Internet connection on the 1st activation call
...