...
If your configuration was successful and DTrack is tracking. You should now be able to use headset tracking in Varjo Base, SteamVR or any SteamVR application.
...
XR-4 Hand Controllers
The XR-4 controllers are completely managed by Varjo Base, but they need to be enabled separately. Since enabling the controllers leads to additional USB traffic which on some hardware can degrade performance, Varjo recommends only enabling them with LPVR if the controllers are needed. Varjo Base’s controller support can be enabled by changing the value of the “Enable Varjo XR-4 Controllers” field to “true”, and then clicking the “Submit” button.
...
Varjo recommends re-starting Varjo Base after making this change. In Base versions 4.4.0 and 4.4.1 at least, the controllers will not be visible in the home scene. Unity-based applications require at least Base 4.4.1 for the controllers to work.
Hand Controllers (before XR-4) and Tracked Objects
Run the LPVR-CAD Varjo SteamVR installer as described in this tutorial (driver installation only).
Open the LPVR control panel by pointing your browser to http://localhost:7118/index.html. Please make sure to enter the address exactly as shown here. We have tested the UI on Chrome, Microsoft Edge and Firefox. Users have reported problems on (pre-Chromium based) Edge browsers and old Internet Explorer.
Adjust the optical tracking system parameters. In this case you just have to make sure that the Port Number matches the one configured as SteamVR data port inside Varjo Base.
...