Connect the LPMS-IG1 IMU to a USB port of your VR PC using the 2m cable provided with your LPVR-DUO set.
Download the LpmsControl 2 (formerly IG1-Control) software installer from this location and run it.
Start LpmsControl 2 (in the image IG1-Control, but same GUI), switch LPMS-IG1 to USBxpress mode and test connection as shown below.
Disconnect LpmsControl 2 and close the application.
NOTE: Further information about LPMS-IG1 and IG1-Control is located here.
There is an issue with some computers, especially specific Windows versions for some reason, and the IG1 USB chip (by a company called SiLabs) driver.
Use this updated SiLabs driver installer:
https://lp-software-downloads.s3.ap-northeast-1.amazonaws.com/LPMS/SiliconLabsDriver/SiliconLabsUSBExpressDriver2022.zip
The driver executable is "USBXpressInstaller_x64.exe".
After the installation make sure to restart the computer. |