View Source

Connect the LPMS-IG1 IMU to a USB port of your VR PC using the 2m cable provided with your LPVR-DUO set.

LP-RESEARCH Knowledge Base > Installing LPMS-IG1 for LPVR-DUO > image-20201211-045711.png

Download the LpmsControl 2 (formerly IG1-Control) software installer from this location and run it.
Start LpmsControl 2 (in the image IG1-Control, but same GUI), switch LPMS-IG1 to USBxpress mode and test connection as shown below.

LP-RESEARCH Knowledge Base > Installing LPMS-IG1 for LPVR-DUO > image-20201211-044030.png

Disconnect LpmsControl 2 and close the application.

NOTE: Further information about LPMS-IG1 and IG1-Control is located here.