Varjo HMD Marker Holder Assembly Instructions

Owned by Klaus Petersen
Last updated: Dec 07, 2020
2 min read

  • Cut out a small piece of double-sided tape. The tape should be of the “foam” type, around 1mm thick. The latest releases of the LPVR Varjo kits contain a piece of tape for this purpose.

  • Attach the double sided tape to the upper part of the Varjo HMD marker holder.

  • Peel off the cover of the double sided tape.

  • Attach the upper part of the Varjo HMD holder to the Varjo HMD.

  • Attach the lower part of the HMD marker holder to the Varjo HMD.

  • Fix the metal screws (left and right side) holding upper and lower part together with a screwdriver.

  • With this the Varjo HMD marker holder is assembled. You can now attach marker poles and marker balls to the holder.