Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Note: This documentation only applies to LPMS-IG1 Series，LPMS3 series and LPMS-BE series

  1. Start LpmsControl2 and connect to the sensor

  2. Check the current firmware version

  3. Select menu > Advanced > Upload Firmware

  4. Press Yes to proceed with firmware update

  5. Select the firmware binary file and press open

  6. The firmware upload process will begin automatically

  7. Once firmware upload is completed, press ok to proceed

  8. Make sure the firmware version is updated accordingly

  • No labels