/
How to update LPMS firmware using LpmsControl 2

How to update LPMS firmware using LpmsControl 2

Note: This documentation only applies to LPMS-IG1 Series,LPMS3 series and LPMS-BE series

  1. Start LpmsControl2 and connect to the sensor

  2. Check the current firmware version

  3. Select menu > Advanced > Upload Firmware

Important: Please make sure to choose “Upload Firmware” when updating firmware. Uploading a firmware binary using “Upload IAP“ will potentially brick the sensor.

 

  1. Press Yes to proceed with firmware update

     

  2. Select the firmware binary file and press open

     

  3. The firmware upload process will begin automatically

     

  4. Once firmware upload is completed, press ok to proceed

     

  5. Make sure the firmware version is updated accordingly

 

Related content

How to update LPMS firmware using LpmsControl 1
How to update LPMS firmware using LpmsControl 1
More like this
LPMS-IG1 Mode Switching and Firmware Upload
LPMS-IG1 Mode Switching and Firmware Upload
More like this
LPMS2 Command List
LPMS2 Command List
More like this
Updating Firmware from 0.0.5 to NAV2-0.2.4-20210821
Updating Firmware from 0.0.5 to NAV2-0.2.4-20210821
More like this
LPMS3 Command List
LPMS3 Command List
More like this
LPMS-BE2 LPBus Command List
LPMS-BE2 LPBus Command List
More like this