Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Step 1

Access to LPMS data logger admin page via: https://<logger ip address>:9090

In this example the logger ip is 192.168.1.56.

Login using the following default credential:

Username: user

Password: password

Step 2

Go to terminal

Make a copy of the default config file

$ sudo cp /etc/netplan/00-installer-config.yaml /etc/netplan/00-installer-config.yaml.bak

Make another copy to lpms data logger file browser folder for editing

$ sudo cp /etc/netplan/00-installer-config.yaml /opt/lpmsdatalogger/logs

Step 3

Access to LPMS data logger file browser via: http://<logger ip address>

Click on 00-installer-config.yaml and edit the content based on the following template

network:
  renderer: networkd
  ethernets:
    インターフェース名:
      dhcp4: false
      dhcp6: false
      addresses: [IPアドレス]
      nameservers:
        addresses: [DNSアドレス]
      routes:
        - to: default
          via: デフォルトゲートウェイのIPアドレス
  version: 2

Sample config:

Please edit the following content according to your settings. Pay attention to ethernet interface name and default gateway ip address.

In this example, my network interface name is enp2s0 and I am setting the static ip address to 192.168.1.220

network:
  renderer: networkd
  ethernets:
    enp2s0:
      dhcp4: false
      dhcp6: false
      addresses:
        - 192.168.1.220/24
      nameservers:
        addresses: [8.8.8.8]
      routes:
        - to: default
          via: 192.168.1.1
  version: 2

Save the file

Step 4

Copy the newly edited file to /etc/netplan 

$ sudo cp /opt/lpmsdatalogger/logs/00-installer-config.yaml /etc/netplan

Step 5

Apply the new netplan settings

$ sudo netplan apply

The IP address of the logger should be set to the new static ip address.

  • No labels