Page Comparison

Steps to update firmware in NAV2 from 0.0.5 to NAV2-0.2.4-20210821.

1. Download the following firmware file:

2. Unzip and place the “firmware” folder into LpmsNAV Control application folder as shown below:

   Image Added

   In side firmware folder should be the firmware files:

   Image Added

...

2. IMPORTANT: This step is important in order for the software to automatically locate relevant files for the subsequent steps

...

2. . Please make sure the firmware folder location and structure is correct before proceeding.

3. From menu > Advanced > click Upload IAP

   Image Modified

   Confirm when prompted to proceed

   Image Modified

4. You should see file is uploaded successfully

   Image Modified

5. Next go to Menu > Advanced > Click Upload Firmware. This step will upload a transition firmware 0.0.6 to enable firmware update to 0.2.x versions.

   Image Modified

   Confirmed when prompted to proceed

   Image Modified

6. The software will show a progress bar to upload firmware 0.0.6. Once completed you should see the sensor version indicating NAV2-0.0.6-Transition

   Image Modified

7. Next we are going to update the firmware again to the latest version NAV2-0.2.4-20210821
   Once again go to Menu > Advanced > Click Upload Firmware

   Image Modified

   Confirmed when prompted to proceed

   Image Modified

8. The software will upload the NAV2-0.2.4-20210821 firmware

   Image Modified

9. Once upload is completed, you should see the firmware version indicating the latest version
   

   Image Modified