Steps to update firmware in NAV2 from 0.0.5 to NAV2-0.2.4-20210821
Unzip and place the “firmware” folder into LpmsNAV Control application folder as shown below:
Note: This step is important in order for the software to automatically locate relevant files for the subsequent steps
From menu > Advanced > click Upload IAP
Confirm when prompted to proceed
You should see file is uploaded successfully
Next go to Menu > Advanced > Click Upload Firmware. This step will upload a transition firmware 0.0.6 to enable firmware update to 0.2.x versions.
Confirmed when prompted to proceed
The software will show a progress bar to upload firmware 0.0.6. Once completed you should see the sensor version indicating NAV2-0.0.6-Transition
Next we are going to update the firmware again to the latest version NAV2-0.2.4-20210821
Once again go to Menu > Advanced > Click Upload FirmwareConfirmed when prompted to proceed
The software will upload the NAV2-0.2.4-20210821 firmware
Once upload is completed, you should see the firmware version indicating the latest version
