Note: This documentation only applies to series 2 LPMS sensors (LPMS-B2 etc.)
If you haven’t done so yet, download and install LpmsControl: https://bitbucket.org/lpresearch/openmat/downloads/OpenMAT-1.3.5-Setup-Build20180418.exe (Win32)
Start LpmsControl (Start menu → OpenMAT → LpmsControl)
Connect to sensor
Select Upload Firmware in Advanced menu
When prompted click Yes
Select firmware file
Wait for firmware download to finish
After the download has finished, the sensor should reconnect automatically and stream data. Make sure to readjust your parameter settings as they might have been reset to default values after the update.
It is recommended to do factory reset to reinitialize all registers to a known state. It is also recommended to perform a gyro static calibration after firmware update:
Magnetometer and Gyro Calibration Guidance