Getting Started with OpenZen

OpenZen allows to access many different sensor models which are connected via different transports layers with one unified programming interface. This allows to develop applications which support a wide range of sensors and allows to easily adapt your application to new or additional sensors.

A list of the must-have parts of an OpenZen client program is:

• Creating an OpenZen client

• Connecting to a sensor

• Accessing sensor components

• Receiving events from OpenZen (for retrieving available sensors, or accessing sensor data)
  Do not add wait or sleep here as it would cause OpenZen client to read in outdated data.

• Closing the sensor connection

Optional parts:

• Listing available sensors (rely on Receiving events from OpenZen)

• Reading and modifying sensor properties

The best way to learn how OpenZen client program works is to take a look at our example source file.

For this page, the example codes are written in C++. We also have Python, C and C# examples in our repo, please check the side navbar for more details (compilations and programming languages support).

IO Systems

To communicate with the sensor hardware, please specify through which IO systems OpenZen should access your sensor.

• USB virtual COM port

  // Windows auto sensorPair = client.obtainSensorByName("WindowsDevice", "//./COM40", 921600); // Linux auto sensorPair = client.obtainSensorByName("LinuxDevice", "devicefile:/dev/ttyUSB0", 921600);

• USB Express (on Windows only)

  auto sensorPair = client.obtainSensorByName("SiUsb", "ig1pcan000028", 921600);

• Bluetooth (only for B2 sensor)

  auto sensorPair = client.obtainSensorByName("Bluetooth", "00:04:3E:53:E9:9F", 115200);

• Network streaming

You can find the full list of available IO systems in the section io-systems.

Sensor Components

A sensor can have multiple components which supply various types of sensor data. Once the connection
to a sensor has been established, the available components can be queried. Sensor data and their properties can be access / modified.

Inertial Measurement Unit (IMU)

Provides accelerometer and gyroscope measurements and the orientation result from the sensor fusion running on the connected sensor. All our sensors provide IMU components in OpenZen.

Global Navigation Satellite System (GNSS)

Provides global position measurements via GPS, BeiDou, GLONASS and Galileo, the associated error estimates and information on the quality and mode of the GNSS fix. Only IG1P sensor has GNSS component.

Keys for Sensor Data Access

Sensor data are collected as events in by the client program. Most of the keys listed in imuData and gnssData are available for access. Note that there are a few limitations on specific data fields:

Creating an OpenZen Client

The following description will use the C++ interface to OpenZen but other language bindings use the same concepts described here. To see the description how to use the other language bindings, please have a look at the respective section for the language you are interested in.

In order to acquire sensor access via OpenZen, you first need to create an OpenZen client. This can be done with the utility method zen::make_client. This call returns an instance of the ZenClient class:

Receiving Events from OpenZen

Every ZenClient instance contains its own event queue which accumulates events from all sensors that were obtained on that client. Events can either be polled using ZenClient::pollNextEvent or waited for using ZenClient::waitForNextEvent.
The only way to terminate a client that is waiting for an event, is by destroying the client or preemptively calling ZenClient::close.

Listing Available Sensors

The IO systems available on your platform can automatically list all available sensors connected to the system. In order to do this, you need to call the method ZenClient::listSensorsAsync to start the query for available sensors. Depending on the IO systems, it can take a couple of seconds for the listing to be complete.

The ZenClient::listSensorsAsync method will return immediately and the information on the found sensors will be send to ZenClient's event queue and can be retrieved with calls to ZenClient::pollNextEvent or ZenClient::waitForNextEvent. You can either do this on your applications main
thread or use a background thread to retrieve the event listing data.

The following code snippets shows an example how to receive the OpenZen events which contain the information during the sensor discovery process.

If the event.component.handle is 0, the event is not specific to a sensor but an event which is related by the OpenZen client itself, like the sensor discovery events. Next, we can check the event.eventType field for the
ZenSensorEvent_SensorFound and ZenSensorEvent_SensorListingProgress event types. For the ZenSensorEvent_SensorFound event, the field event.data.sensorFound is of type ZenSensorDesc which contains the sensor's name, serial number and all information required to connect to the sensor.

Connecting to a Sensor

A sensor found by the ZenClient::listSensorsAsync call can be connected via the OpenZen client using the ZenSensorDesc which is contained in the event.data.sensorFound of the ZenSensorEvent_SensorFound. The method call to ZenClient::obtainSensor returns a std::pair where the first entry is a possible error code and the second entry is an instance of the object zen::ZenSensor which can be used to access the Sensor's
properties.

Sensors can also connected directly if the IO system they are connected too and their name is known already. Here, the method ZenClient::obtainSensorByName can be called with the name of the IO system and the name of the sensor:

Please check the documentation in the section io-system-label. for the available IO systems and which naming conventions they use to identify connected sensors.

You can connect multiple sensor via one ZenClient and the events of all sensor will be available on the event queue of the ZenClient instance.

Reading and Modifying Sensor Properties

OpenZen allows to read an modify the properties of connected sensors. Which properties are available depends on the concrete sensor connected. You can find more information on sensor properties in the section supported-sensors-label.

Each sensor property in OpenZen has a specific data type and the respective method needsto be used on the zen::ZenSensor instance.

Accessing Sensor Components

To access a specific component of a sensor, the method call ZenSensor::getAnyComponentOfType can be used to retrieve the component of a specific type. If this component is not available on this sensor, an error will be returned.

As with the ZenSensor class the ZenSensorComponent returned by ZenSensor::getAnyComponentOfType call can be used to access and modify the properties of the sensor component.

Reading Sensor Values

To start receiving data from a connected sensor, you need to ensure that the sensor is in streaming mode to send out data on its own:

Now, sensor events with measurement data will be available on the event queue of the OpenZen client.
You can use the previously introduced methods ZenClient::pollNextEvent or ZenClient::waitForNextEvent to retrieve the sensor data of the inertial measurement unit:

To process the GNSS data streamed from the sensor, you can filter for events coming from the GNSS component like this:

Closing the Sensor Connection

Once you are done with sampling sensor values, you can release the connection to the sensor and close the connection with the client: